ASME piping codes are filed under this number

valve packing often made of this material used to coast frying pans

babbits are primarily used in the construction of this

a seal weld is not designed for strength, its only purpose is to do this

a slag inclusion occurs because of this oversight

van stone flanges are generally constructed from this material or other expensive metals

this variety of valve has a by-pass, isolating valves before and after, and a pressure gauge with a safety valve on the low pressure side

steel that has a carbon content greater than 2% is considered this

stick welding is under this asme designation

some indication such as this are difficult to find while using a penetrameter

refractory fibre's temperature limit reaches temperatures as high as this

a strainer is generally installed upstream of this device

this type of test uses a 10 mm tungsten carbide ball pressed with a 3000 kg load for ferrous materials. the indent created by the ball is measured.

this is the chemical name for acetylene

a transducer uses this effect to vibrate a quartz wafer

the angle of bevel in a pipe to be welded

these valves have two body style: lug and wafer

BOF stands for basic oxygen furnace, it is called basic for the reason that it has these qualities in the furnace lining

a code 4 welding position indicates that the weld is only to be done in this position

another name for penatremeter

screwed connections are generally used for pipes sizes less than this

ball valves can be manufactured in sizes 3 to 1000 mm and can be rated up to this pressure

steel is considered stainless if it has this percentage or higher of this element

welding with a DC power supply set up this way causes 2/3 of the heat to transfer into the parent metal.

a fluid used to permit the ultrasound signal to exit the transducer and enter the specimen